Waveguide to Coax Adapters
Waveguide to Coax Adapters are essential microwave components used to connect waveguide transmission systems with coaxial RF equipment. They enable efficient signal transfer between waveguide ports and coaxial connectors, making them suitable for high-frequency communication, radar systems, satellite communications, aerospace, defense, and RF testing applications.
SRFS Teleinfra offers RF and microwave connectivity solutions for demanding applications that require reliable signal transmission and precision integration. Waveguide to Coax Adapters can be selected according to waveguide size, operating frequency, coaxial connector type, power-handling requirements, and mechanical configuration.
WR10 to 1mm Female Waveguide to Coaxial Adapter UG387-U Flange, End-launch ADPWR101EL
WR10 to 1mm Female Waveguide to Coaxial Adapter UG387-UFlange, Right Angle ADPWR101A
WR10 to1mm Male Waveguide to Coaxial Adapter UG387-U Flange, End-launch ADPWR101EM
WR42 to SMA Female Waveguide to Coaxial Adapter PBR220 Flange, End Launch ADPWR42SMAELG
WR42 to SMA Female Waveguide to Coaxial Adapter PBR220 Flange, Right Angle ADPWR42SMAG
WR42 to SMA Female Waveguide to Coaxial Adapter UBR220 Flange, End Launch ADPWR42SMAEL
WR42 to SMA Female Waveguide to Coaxial Adapter UBR220 Flange, Right Angle ADPWR42SMA
WR51 to N Female Waveguide to Coaxial Adapter MIL3922-70-023 Flange, End Launch ADPWR51NELA
WR51 to N Female Waveguide to Coaxial Adapter MIL3922-70-023 Flange, Right Angle ADPWR51NA
WR51 to N Male Waveguide to Coaxial Adapter MIL3922-70-023 Flange, End Launch ADPWR51NMELA
WR51 to SMA Female Waveguide to Coaxial Adapter UBR180 Flange, Right Angle ADPWR51SMA
WR51 to SMA Female Waveguide to Coaxial Adapter UBR180 Flange, End Launch ADPWR51SMAEL
WR62 to N Female Waveguide to Coaxial Adapter UBR140 Flange, End Launch ADPWR62NEL
WR62 to N Female Waveguide to Coaxial Adapter UBR140 Flange, Right Angle ADPWR62N
WR62 to SMA Female Waveguide to Coaxial Adapter PBR140 Fange, End Launch ADPWR62SMAELG
WR62 to SMA Female Waveguide to Coaxial Adapter PBR140 Flange, Right Angle ADPWR62SMAG
WR62 to SMA Female Waveguide to Coaxial Adapter UBR140 Flange, End Launch ADPWR62SMAEL
WR62 to SMA Female Waveguide to Coaxial Adapter UBR140 Flange, Right Angle ADPWR62SMA
WR62 to SMA Male Waveguide to Coaxial Adapter UBR140 Flange, End Launch ADPWR62SMAMEL
WR62 to SMA Male Waveguide to Coaxial Adapter UBR140Flange, Right Angle ADPWR62SMAM
WR75 to N Female Waveguide to Coaxial Adapter UBR120 Flange, Right Angle ADPWR75N
WR75 to N Male Waveguide to Coaxial Adapter UBR120 Flange, End Launch ADPWR75NMEL
WR75 to N Male Waveguide to Coaxial Adapter UBR120 Flange, RightAngle ADPWR75NM
WR75 to SMA Female Waveguide to Coaxial Adapter UBR120 Flange, Right Angle ADPWR75SMA
WR75 to TNC Female Wave guide to Coaxial Adapter UBR120 Flange, Right Angle ADPWR75T
WR90 to N Female Waveguide to Coaxial Adapter UBR100 Flange, Right Angle ADPWR90N
WR10 to 1mm Female Waveguide to Coaxial Adapter UG387-U Flange, End-launch ADPWR101EL
WR10 to 1mm Female Waveguide to Coaxial Adapter UG387-UFlange, Right Angle ADPWR101A
WR10 to 1mm Male Waveguide to Coaxial Adapter UG387-U Flange, End-launch ADPWR101EM
WR10 to 1mm Male Waveguide to Coaxial Adapter UG387-U Flange, Right Angle ADPWR101M
WR12 to 1mm Female Waveguide to Coaxial Adapter UG387-UFlange, End-launch ADPWR121EL
WR12 to 1mm Male Waveguide to Coaxial Adapter UG387-UFlange, End-launch ADPWR121EM
WR12 to 1mm Female Waveguide to Coaxial Adapter UG387-UFlange, Right Angle ADPWR121
WR12 to 1mm Male Waveguide to Coaxial Adapter UG387-U Flange, Right Angle ADPWR121M
WR15 to 1.85mm Female Waveguide to Coaxial Adapter UG385-UFlange, Right Angle ADPWR15185
WR15 to 1.85mm Female Waveguide to Coaxial Adapter UG385-UFlange, End Launch ADPWR15185EL
WR15 to1.85mm Male Waveguide to Coaxial Adapter UG385-U Flange, End Launch ADPWR15185MEL
WR19 to1.85mm Female Waveguide to Coaxial Adapter UG383-U Mod Flange, End Launch ADPWR19185EL
WR19 to1.85mm Female Waveguide to Coaxial Adapter UG383-U Mod Flange, Right Angle ADPWR19185
WR22 to 2.4mm Female Waveguide to Coaxial Adapter UG383-U Flange, End-launch ADPWR2224EL
WR22 to 2.4mm Female Waveguide to Coaxial Adapter UG383-UFlange, Right Angle ADPWR2224
WR22 to 2.4mm Female Waveguide to Coaxial Adapter UG599-UFlange, Right Angle ADPWR2224S
WR22 to 2.4mm Male Waveguide to Coaxial Adapter UG383-U Flange, Right Angle ADPWR2224M
WR22 to 2.4mm Male Waveguide to Coaxial Adapter UG383-UFlange, End-launch ADPWR2224EM
WR22 to 1.85mm Female Waveguide to Coaxial Adapter UG383-U Flange, End-launch ADPWR22185EL
WR22 to 1.85mm Female Waveguide to Coaxial Adapter UG383-UFlange, Right Angle ADPWR22185
WR28 to 2.92mm Female Waveguide to Coaxial Adapter UBR320 Flange, End-launch ADPWR28292EL
WR28 to 2.92mm Female Waveguide to Coaxial Adapter PBR320 Flange,Right Angle ADPWR28292G
WR34 to 2.92mm Female Waveguide to Coaxial Adapter UBR260 Flange, Right Angle ADPWR34292
WR42 to 2.92mm Female Waveguide to Coaxial Adapter UBR220 Flange, End Launch ADPWR42292EL
WR42 to 2.92mm Female Waveguide to Coaxial Adapter UG595-U Flange, Right Angle ADPWR42292A
WR51 to 2.92mm Female Waveguide to Coaxial Adapter UBR180 Flange, End Launch ADPWR51292EL
WR51 to 2.92mm Female Waveguide to Coaxial Adapter UBR180 Flange, Right Angle ADPWR51292
WR51 to 3.5mm Female Waveguide to Coaxial Adapter UBR180 Flange, Right Angle ADPWR5135
WR62 to 2.92mm Female Waveguide to Coaxial Adapter UBR140 Flange, End Launch ADPWR62292EL
WR62 to 2.92mm Female Waveguide to Coaxial Adapter UBR140 Flange, Right Angle ADPWR62292
WR75 to TNC Female Waveguide to Coaxial Adapter UBR120 Flange, Right Angle ADPWR75T
WR90 to N Female Waveguide to Coaxial Adapter UBR100 Flange, Right Angle ADPWR90N
What Are Waveguide to Coax Adapters?
A Waveguide to Coax Adapter is a transition component that connects a rectangular or circular waveguide to a coaxial transmission line. Waveguides are commonly used to carry microwave signals at high frequencies, while coaxial cables provide flexible connections to RF instruments, amplifiers, antennas, and other microwave devices.
These adapters provide a practical interface between the two transmission technologies. Their design is important for maintaining impedance matching, controlling reflections, and minimizing insertion loss across the intended frequency band.
The appropriate adapter depends on the waveguide designation, frequency range, coaxial connector interface, flange configuration, and required electrical performance.
Technical Specifications
Waveguide to Coax Adapters are available in different configurations depending on the microwave system and installation requirements. Exact electrical specifications should be confirmed for the selected model.
Parameter | Specification |
|---|---|
Product Type | Waveguide to Coax Adapter |
Waveguide Configuration | Rectangular or other specified waveguide types |
Coaxial Connector | SMA, N-Type, 2.92mm, 3.5mm, or specified interface |
Frequency Range | Depends on waveguide size and adapter design |
Impedance | Typically 50 Ohm coaxial interface |
Insertion Loss | Model-dependent; confirm datasheet |
VSWR | Model-dependent; confirm datasheet |
Waveguide Flange | As specified by the selected model |
Material | Model-dependent conductive metal construction |
Applications | Microwave, radar, satellite, RF testing, aerospace and defense |
Types of Waveguide to Coax Adapters
1. Rectangular Waveguide to Coax Adapter
Designed to connect rectangular waveguides to coaxial interfaces. These adapters are used in microwave communication equipment, radar assemblies, test benches, and high-frequency transmission systems.
2. Waveguide to SMA Adapter
This configuration provides a transition between a waveguide port and an SMA coaxial interface. It is useful in compact microwave assemblies, laboratory equipment, and RF measurement setups, subject to the adapter’s specified frequency range.
3. Waveguide to N-Type Adapter
Waveguide to N-Type Adapters connect waveguide systems to N-type coaxial cables or equipment. They can be used in microwave communication links, antenna systems, and test configurations where the specified connector and frequency requirements are compatible.
4. Waveguide to 2.92mm or 3.5mm Coaxial Adapter
These configurations are intended for precision microwave test systems using 2.92mm or 3.5mm coaxial interfaces. Selection must account for the supported frequency band, connector performance, waveguide mode, and transition design.
5. Custom Waveguide to Coax Transitions
Custom transitions can be specified for particular waveguide sizes, connector interfaces, mounting arrangements, and system integration requirements. Electrical performance should be confirmed against the required operating band and application.
Applications of Waveguide to Coax Adapters
NMD adapters are used in applications where repeatable connections and accurate high-frequency measurements are important.
Vector Network Analyzers (VNA): Connect compatible test ports to cables, calibration accessories, and RF devices.
RF and Microwave Laboratories: Support component testing, characterization, and verification.
Calibration and Metrology: Provide suitable interfaces for precision measurement setups.
Telecommunications: Support testing of RF components used in wireless communication infrastructure.
Aerospace and Defense: Assist with testing RF and microwave assemblies and electronic systems.
Research and Development: Enable evaluation of high-frequency components and prototype systems.
Production Testing: Provide repeatable connections for component inspection and quality-control processes.
Key Features and Benefits
Reliable Microwave Signal Transition
Designed to provide a connection between waveguide and coaxial transmission lines, allowing different RF components to be integrated into a common system.
Low Insertion Loss
A properly selected and installed adapter helps limit signal loss across the transition. Actual performance depends on the design and operating frequency.
Controlled Signal Reflection
The transition geometry affects impedance matching and return loss. Selecting a model designed for the required frequency band helps maintain consistent system performance.
Multiple Connector Configurations
Adapters may be available with different coaxial interfaces and waveguide sizes to suit specific equipment and installation requirements.
Precision Mechanical Interface
Accurate alignment, compatible flange dimensions, and secure connector mating are important for repeatable microwave performance.
Suitable for High-Frequency Systems
Waveguide-to-coax transitions support microwave applications when the adapter’s specified operating band and electrical characteristics meet system requirements.
NMD Adapter Specifications
| Product Specification | Details |
|---|---|
| Product Name | Waveguide to Coax Adapters |
| Product Type | Waveguide to Coaxial RF Transition Adapter |
| Waveguide Type | Rectangular Waveguide / Model Dependent |
| Waveguide Designation | WR Series / As Per Model |
| Coaxial Connector | SMA, N-Type, 2.92mm, 3.5mm / As Per Model |
| Impedance | Typically 50 Ohm at the Coaxial Interface |
| Frequency Range | Model Dependent |
| Insertion Loss | As Per Manufacturer Datasheet |
| VSWR | As Per Manufacturer Datasheet |
| Waveguide Flange | As Per Model and Mounting Requirements |
| Material | Conductive Metal Construction, Model Dependent |
| Power Handling | As Per Manufacturer Datasheet |
| Mounting Type | Flange Mount / Model Dependent |
| Applications | Radar, Satellite Communication, Microwave Systems, RF Testing, Aerospace and Defense |
Why Choose Us
Reliable RF Connectivity Solutions
SRFS Teleinfra supplies RF and microwave components for telecom infrastructure, wireless communication, and specialized testing applications.
Multiple RF Product Categories
Customers can source NMD adapters alongside RF cables, VNA test cables, coaxial adapters, connectors, attenuators, and other RF components.
Application-Based Product Selection
Adapter selection can be matched to the required interface, frequency range, equipment type, and measurement setup.
Technical Product Support
Our team can help identify suitable adapter configurations based on the equipment interface and required operating specifications.
Frequently Asked Questions
A Waveguide to Coax Adapter is a microwave component that connects a waveguide transmission line to a coaxial RF connector, allowing signals to pass between the two interfaces.
They are used when microwave equipment with waveguide ports must connect to coaxial cables, instruments, amplifiers, or other RF components.
Depending on the product design, coaxial interfaces may include SMA, N-Type, 2.92mm, or 3.5mm connectors. Confirm the exact configuration before ordering.
The operating frequency depends on the waveguide size, supported waveguide mode, coaxial interface, and transition design. Refer to the selected product datasheet for its specified frequency range.
A WR-137 adapter is designed around the WR-137 waveguide interface. The compatible coaxial connector and operating band must be verified for the particular adapter model.
The coaxial interface is typically designed for a 50 Ohm system. The waveguide side is characterized by its waveguide properties rather than a simple fixed 50 Ohm impedance.
Low VSWR indicates reduced signal reflection at the transition under specified operating conditions, helping improve power transfer and measurement accuracy.
Common applications include radar, satellite communications, aerospace and defense systems, microwave links, antenna systems, and RF laboratories.
Check the waveguide designation, frequency range, coaxial connector, flange interface, power-handling requirement, insertion loss, and VSWR.