SRFS Teleinfra

Products

Low Pim Termination

Low PIM Terminations are precision-engineered RF components designed to absorb unwanted RF signals while minimizing Passive Intermodulation (PIM) distortion in high-performance communication systems. These terminations play an important role in maintaining signal quality, reducing interference, and ensuring reliable network performance in modern wireless communication infrastructure. They are widely used in 4G LTE, 5G networks, Distributed Antenna Systems (DAS), In-Building Solutions (IBS), Base Transceiver Stations (BTS), telecom towers, and RF testing applications. At SRFS Teleinfra, we offer high-quality Low PIM Terminations engineered for excellent electrical performance, low VSWR, superior return loss, and extremely low passive intermodulation.

Our Low PIM Terminations are manufactured using premium-grade materials, precision-machined connector interfaces, and advanced manufacturing techniques to ensure stable 50 Ohm impedance and reliable RF performance. Designed to minimize unwanted intermodulation products, these components help prevent interference in sensitive receiver systems and maintain clear signal transmission in high-density wireless networks. They are suitable for use with RF antennas, coaxial cable assemblies, power dividers, directional couplers, combiners, and other telecom infrastructure components.

All our Low PIM Terminations are manufactured in India under stringent quality control procedures using carefully selected raw materials and advanced production processes. Every product is designed to deliver consistent electrical performance, excellent mechanical durability, and long operational life in demanding RF environments. Our solutions support telecom operators, system integrators, infrastructure providers, and RF testing laboratories across India.

4.3-10 Female,-160dBc, 50W, Rectangular TLP045043101-D

4.3-10 Female,-160dBc, 50W, Rectangular TLP045043101-D

4.3-10 Female,-160dBc, 200W, Rectangular TLP0420043101-DA

4.3-10 Female,-160dBc, 200W, Rectangular TLP0420043101-DA

4.3-10 Female,-160dBc,100 W,Rectangular TLP0410043101-D

4.3-10 Female,-160dBc,100 W,Rectangular TLP0410043101-D

4.3-10 Male,-160 dBc,100 W, Rectangular TLP0410043102-D

4.3-10 Male,-160 dBc,100 W, Rectangular TLP0410043102-D

4.3-10 Male,-160dBc, 50W, Rectangular TLP045043102-D

4.3-10 Male,-160dBc, 50W, Rectangular TLP045043102-D

400-6000 MHz, DIN 7-16 Female, -160dBc, 300W, Rectangular TLP04300D1-D

400-6000 MHz, DIN 7-16 Female, -160dBc, 300W, Rectangular TLP04300D1-D

400-6000 MHz,4.3-10 Female,-160 dBc,300W, Rectangular TLP0430043101-D

400-6000 MHz,4.3-10 Female,-160 dBc,300W, Rectangular TLP0430043101-D

400-6000 MHz,N Female,-160 dBc,300W, Rectangular TLP04300N1-D

400-6000 MHz,N Female,-160 dBc,300W, Rectangular TLP04300N1-D

400-6000 MHz,N Male,-160dBc, 300W, Rectangular TLP04300N2-D

400-6000 MHz,N Male,-160dBc, 300W, Rectangular TLP04300N2-D

555-6000 MHz, 4.3-10 Female,-160 dBc,200 W, Rectangular TLP0520043101-D

555-6000 MHz, 4.3-10 Female,-160 dBc,200 W, Rectangular TLP0520043101-D

555-6000 MHz, DIN7-16Male,-160dBc, 200W, Rectangular TLP05200D2-D

555-6000 MHz, DIN7-16Male,-160dBc, 200W, Rectangular TLP05200D2-D

555-6000MHz, 4.3-10Male,-160dBc, 200W, Rectangular TLP0520043102-D

555-6000MHz, 4.3-10Male,-160dBc, 200W, Rectangular TLP0520043102-D

555-6000MHz, DIN 7-16 Female,-160dBc, 200W, Rectangular TLP05200D1-D

555-6000MHz, DIN 7-16 Female,-160dBc, 200W, Rectangular TLP05200D1-D

DIN 7-16 Female,-160 dBc,50W,Rectangular TLP0450D1-D

DIN 7-16 Female,-160 dBc,50W,Rectangular TLP0450D1-D

DIN 7-16 Female,-160dBc,100W,Rectangular TLP04100D1-D

DIN 7-16 Female,-160dBc,100W,Rectangular TLP04100D1-D

N Female,-160 dBc,50 W, Rectangular TLP0450N1-D

N Female,-160 dBc,50 W, Rectangular TLP0450N1-D

N Female,-160dBc,100W, Rectangular TLP04100N1-D

N Female,-160dBc,100W, Rectangular TLP04100N1-D

N Female,-160dBc,150W, Rectangular TLP04150N1-DA

N Female,-160dBc,150W, Rectangular TLP04150N1-DA

N Male,-160dBc,50 W, Rectangular TLP0450N2-D

N Male,-160dBc,50 W, Rectangular TLP0450N2-D

What is a Low PIM Termination?

A Low PIM Termination is an RF component designed to absorb incoming radio frequency energy while generating minimal passive intermodulation distortion. It provides a standard 50 Ohm impedance match at the end of an RF transmission line, minimizing signal reflections and maintaining excellent signal integrity.

Passive Intermodulation occurs when two or more RF signals interact with nonlinearities in passive components, producing unwanted frequency signals that can interfere with communication networks. Low PIM Terminations are specifically designed with carefully selected materials and precision manufacturing processes to minimize these unwanted signals.

These terminations are particularly important in cellular communication systems, where even low levels of PIM can negatively affect receiver sensitivity, network capacity, and overall wireless performance.

Types of Low PIM Terminations

N Female Low PIM Termination

N Female Low PIM Terminations are designed for reliable RF power absorption in telecom infrastructure, antenna systems, and outdoor wireless communication networks. They provide stable impedance matching and excellent low-PIM performance.

DIN Male Low PIM Termination

DIN Male Low PIM Terminations are widely used in high-power RF applications, DAS, IBS, and cellular base stations. Their robust construction ensures dependable connectivity and minimal passive intermodulation.

4.3-10 Male Low PIM Termination

4.3-10 Male Low PIM Terminations are designed for modern 4G LTE and 5G communication systems. They offer excellent electrical performance, low PIM characteristics, and reliable operation in high-density telecom networks.

High Power Low PIM Termination

High Power Low PIM Terminations are engineered to absorb higher levels of RF power while maintaining stable electrical characteristics. They are suitable for base stations, antenna distribution systems, and high-power communication infrastructure.

Outdoor Low PIM Termination

Outdoor Low PIM Terminations feature durable, weather-resistant construction for installation in telecom towers, rooftop antennas, and outdoor RF distribution systems.

Indoor Low PIM Dummy Load

Indoor Low PIM Dummy Loads are designed for RF signal termination in indoor communication systems, DAS networks, IBS installations, and laboratory testing environments.

50 Ohm Low PIM RF Termination

These terminations provide accurate 50 Ohm impedance matching to absorb RF energy efficiently and minimize unwanted signal reflections in coaxial transmission lines.

Low PIM Termination Product Specifications

Product Type

Frequency Range

Power Rating

PIM Rating

N Male Low PIM Termination

DC–4 GHz

50W

-165 dBc

N Male Low PIM Termination

DC–3.8 GHz

25W

-165 dBc

N Female Low PIM Termination

Up to 6 GHz

Model dependent

-165 dBc

4.3-10 Male Low PIM Termination

Up to 4 GHz

100W

Model dependent

4.3-10 Male RF Load

Up to 4 GHz

200W

-163 dBc

4.3-10 Female Low PIM Termination

Up to 4 GHz

Model dependent

-163 dBc

DIN Male Low PIM Termination

Up to 4 GHz

50W

Model dependent

Indoor RF Dummy Load

DC–4 GHz

25W

Model dependent

High Power RF Dummy Load

DC–3.8 GHz

200W

Model dependent

The table provides representative product configurations. Confirm exact specifications with the corresponding product datasheet before ordering.

Technical Specifications

Our Low PIM Terminations are precision-engineered to deliver reliable RF performance, excellent power absorption, and minimal intermodulation distortion.

Impedance

Standard 50 Ohm impedance for accurate impedance matching and reduced signal reflections.

Frequency Range

Available in different frequency configurations, including DC to 4 GHz, DC to 6 GHz, and selected models supporting higher frequencies.

PIM Rating

Available with ultra-low PIM performance, including -160 dBc, -163 dBc, and -165 dBc models, depending on product configuration and specified test conditions.

Power Rating

Available in multiple power handling options, including 25W, 50W, 100W, and 200W configurations.

VSWR

Low VSWR characteristics help minimize reflected RF energy and maintain efficient signal transmission.

Connector Interface

Available with N Type, 7/16 DIN, and 4.3-10 connector interfaces in different male and female configurations.

Construction Material

Manufactured using premium conductive materials, brass, aluminum alloys, precision contacts, and high-quality dielectric materials for durability and electrical stability.

Environmental Protection

Selected outdoor models feature weather-resistant construction and IP-rated protection for reliable operation in demanding installation environments.

Note: Actual specifications depend on the selected model. PIM ratings, frequency range, VSWR, and power handling should be verified against individual product datasheets.

Applications of Low PIM Terminations

Our Low PIM Terminations are widely used in:

  • 4G LTE communication networks

  • 5G telecom infrastructure

  • Distributed Antenna Systems (DAS)

  • In-Building Solutions (IBS)

  • Telecom base stations

  • BTS and BSC infrastructure

  • Cellular antenna systems

  • Telecom towers and rooftop installations

  • RF signal distribution networks

  • Wireless communication systems

  • RF testing and measurement laboratories

  • Microwave communication systems

  • Multi-band antenna installations

  • Radio frequency power distribution systems

Key Performance Factors

Selecting the right Low PIM Termination is essential for maintaining signal quality and reducing interference in modern wireless communication systems.

  • Ultra-low passive intermodulation performance

  • Standard 50 Ohm impedance matching

  • Low VSWR and excellent return loss

  • Multiple frequency range options

  • High RF power handling capability

  • N Type, DIN, and 4.3-10 connector options

  • Reliable RF power absorption

  • Corrosion-resistant construction

  • Indoor and outdoor installation options

  • Excellent mechanical durability

  • Stable electrical performance

  • Suitable for 4G LTE and 5G networks

High-quality Low PIM Terminations help reduce unwanted RF interference, improve receiver sensitivity, minimize signal reflections, and maintain reliable communication performance in modern telecom infrastructure.

Why Choose us

Ultra-Low PIM Performance

Our range includes SMA End Launch Connectors and other available configurations to support different interface and installation requirements.

High Power RF Capability

We offer multiple power handling configurations to support different telecom infrastructure requirements, including high-power antenna systems, base stations, and RF distribution networks.

    Excellent RF Signal Performance

    Designed with stable 50 Ohm impedance matching, low VSWR, and reliable RF power absorption to ensure consistent electrical performance.

      Multiple Connector Configurations

      Available with N Type, 7/16 DIN, and 4.3-10 interfaces to support different RF connectivity and installation requirements.

      Frequently Asked Questions

      A Low PIM Termination is an RF dummy load designed to absorb unwanted RF power while minimizing passive intermodulation distortion. It provides proper impedance matching and prevents unwanted signal reflections in RF communication systems.

      Low PIM Terminations help reduce unwanted RF interference, maintain receiver sensitivity, and improve signal quality in 4G LTE, 5G, DAS, IBS, and cellular communication networks.

      Most Low PIM Terminations are designed with standard 50 Ohm impedance for reliable RF power absorption and accurate impedance matching.

      Depending on the model, Low PIM Terminations are available for DC to 4 GHz, DC to 6 GHz, and selected higher-frequency applications.

      Common available PIM performance ratings include -160 dBc, -163 dBc, and -165 dBc. The actual rating depends on the product and specified test conditions.

      Low PIM Terminations are available in different power configurations, including 25W, 50W, 100W, and 200W, depending on the model.

      Common connector interfaces include N Male, N Female, DIN Male, DIN Female, 4.3-10 Male, and 4.3-10 Female.