Low Loss RA SMA Male to RA N Male Cable Using Coax Cable is a reliable RF cable assembly designed for efficient signal transmission across wireless and communication systems. Featuring right-angle SMA male and N male connectors, it provides convenient installation and secure connectivity in compact equipment layouts. Its low-loss coaxial construction helps minimize signal attenuation while maintaining signal integrity and stable electrical performance. This cable is suitable for antennas, base stations, wireless networks, RF equipment, telecom infrastructure, test and measurement systems, and outdoor installations. It offers dependable connectivity, flexible routing, and consistent performance for professional RF applications.
| Cable Type | 142LL |
| Impedance | 50 Ohms |
| Inner Conductor Type | Solid |
| Inner Conductor Material and Plating | Copper, Silver |
| Dielectric Type | PTFE |
| Number of Shields | 3 |
| Shield Layer 1 | Silver Plated Copper Tape |
| Shield Layer 2 | Aluminum Polyester |
| Shield Layer 3 | Silver Plated Copper Wire |
| Jacket Material | FEP, Green |
| Jacket Diameter | 0.195 in [4.95 mm] |
| Frequency Range | DC-18 MHz |
| Characteristic Impedance | 50 ohms |
| VSWR | 1.5:1 |
| Return Loss | 13.98dB |
| Insertion Loss | 0.33 [1.31] dB/ft [dB/m] |
| Velocity of Propagation | 83% |
| RF Shielding | 95 dB |
| Capacitance | 25 [82.02] pF/ft [pF/m] |
| Diameter | 1.14 in [28.96 mm] |
| CONNECTORS | CONNECTOR1 | CONNECTOR2 |
|---|---|---|
| Type | SMA Male | N Female |
| Polarity | Standard | Standard |
| Impedance | 50 Ohms | 50 Ohms |
| Contact Material & Plating | Beryllium Copper, Gold | Beryllium Copper, Gold |
| Dielectric Type | PTFE | PTFE |
| Coupling Nut Material & Plating | Passivated Stainless Steel | Passivated Stainless Steel |
| Coupling Nut Plating Specification | SAE-AMS-2700 | SAE-AMS-2701 |
| Torque | 8 in-lbs [0.57 Nm] | 14 in-lbs [1.58 Nm] |
| Hex Size | 5/16 Inch | ¾ inch |
| Body Material & Plating | Passivated Stainless Steel | Passivated Stainless Steel |
| Connection Method | Standard | Standard |
| Body Plating Spec. | SAE-AMS-2700 | SAE-AMS-2701 |
| Operating Range | -55 to +125 degree C |